ComponentsPrice_GuideContactresistorTechnical NotesPeace Love PetzHOME

Vintage and Antique Items/Parts

Just some of the items you may find for sale!

Site Created 08/10/96 Page Updated 07/07/23

Bookmark this PAGE!

 
WJOE HOME page
  Items for Sale MAIN Page

Just some of the items you may find for sale!

Vintage cassette parts, antique radios and parts, novelty radio, meters, knobs, tubes, tube shields, hardware, R-to R parts...MORE!

RCA IF Transformer 75212-A

OEM NOS IF transformer for TV we beleive. It states sound discriminator tunes to 21.25 Mhz. Perhaps you can use it for other circuits.

$5

RCA Potentiometer 77223

OEM NOS part. 1.5 meg with a tap at .25 Meg as well as a DPST switch. These are not easy to find. Can be used for anything! We have four available.

$8 each

CRL PA-7007 Rotary Switch

NOS single pole 6 position rotary switch. We have three available. Fantastic price!

$5 each

Pioneer VU Meter

A great meter for any project. Excellent condition and working just as it should. Don't remember what deck they came out of, but these were used in many vintage Pioneer decks.

Two available

Add to Cart $10 each

RCA Potentiometer 100396-B

OEM NOS 250K pot with a long shaft. Super high quality. Can be used for anything.

$5

Panasonic MIC and Case

A must have for the correct tape recorder. Came from a Panasonic deck, and will be plug and play. Can be used with anything that requires a MIC.

Add to Cart $8

Panasonic/Mitsubishi Motor

Part numbers in the picture. Tested and working. Dont remeber what it come out of, but it was a cassette deck. Comes as shown in the pictures.

SOLD

 

Infinity DC to DC Converter

NEW P/N VHK100W-Q24-S12. You get a steady 12 volts 8.3 A output with an input voltage range of 9 - 36 volts.

4.23" L x 4.01" W x 1.50" H (107.5mm x 101.8mm x 38.0mm)

Current price CLICK HERE My price $118 while they last.

Add to Cart $118

Pioneer Cassette Deck Solenoid

This came from a CT-F755, but will work in many decks. Also great for various electronic circuits, or expermentors.

Add to Cart $4

Pioneer Sendust Cassette Head

These show no wear and are as clean as can be. Sendust play head, and record head from a Pioneer deck. Came out of a CT-F755, but can be used anywhere. You get whats shown. One wire is cut. The others are original length.

Add to Cart SOLD

Philco 30-6509-1

OEM NOS Philco television part called an RC Network.

$3

Philco 30-6539-1

OEM NOS Philco television part called an RC Network.

$3

Motorola 18K48539

OEM NOS potentiometer with a SPST switch. Nice quality with a long shaft. Can be used for anything.

$5

RCA 100853 Coil

OEM NOS Television width control 2 - 16 mh adjustable coil. Can be used for anything electronic.

$5

X-large Heat Sinks

Came from high power amplifiers. Can be used for anything that needs to get rid of heat! 11 x 3" and 9 3/4 x 2 1/2

 

Add to Cart$12

KLH Cue Detecting Arm

Smaller arm part of record cue system.

Add to Cart $6

Zenith A-9982-05, LG 902-91

OEM NOS Zenith IC. Not sure what it is. We think an audio output.

$4

E.F. Johnson 26-166

OEM NOS Variable capacitor. Tiny circuit board mount.

$3

KLH 19 Record CUE Arm

In great condition. Ready to install, and includes the spring and clip. This should fit most KLH turn tables. Shown in two halves.

Add to Cart  $12

Pioneer Motor RMX-088

Came from a working CT-330 deck, but fits many others. Likr the CT-320, CT-3, and so-on. Can be used for electronic projects as well.

SOLD

KLH Truntable Auto-return Gear

This should fit many other models, and makes. This is a diecast approx 3.55 inches diameter. The E clip is included.

Add to Cart $10 

Platter Beauty Plate

This came off a KLH 19, and may also fit Garrard. It should fit all the KLH series for this type of table. Will add a lot of value for the asking price.

Add to Cart $7

RCA 109835 Circuit Breaker

OEM NOS circuit breaker.

$5

Philco 33-5593-34

OEM NOS Potentiometer and SPST switch.

$5

Philco 33-5593-14

OEM NOS 30K ohm potentiometer. Can be used anywhere a variable resistor is needed. Three are available.

$3 each

RCA 107396

OEM NOS triple potentiometers on a circuit board, May have many uses.

$3

RCA 113322

OEM NOS Slug tuned coil.

$3

RCA 102628 Potentiometer

OEM NOS 5K pot with a DPST switch. Solder tabs. Can be used for any electronic circuit.

$5

KLH Tone Arm and Pickering V-15/AT-1

Free tone arm with head shell, cartridge and stylus.

Add to Cart $59

 

KLH Spindle Set

This came form a KLH turntable. You get both shown.

Add to Cart $10

 

White Plastic Feet

Set of four with long wood type screws. These are from a KLH 19 system, but will work just about anywhere!

Add to Cart $8

KLH 19 Motor and Switch

Used tested motor and switch with complete wires and connector. It will work on other KLH systems and most other brands. These are common, and this one has two field coils. Can be used to upgrade yours.

Add to Cart $18

Motor, Pioneer Cassette Deck 01

Very good condition. Compete assembly in great condition ready to install. Full lenght wires. Can be used for anything! We have two to offer.

Add to Cart $8

2" Speaker Lot

Very good condition. You get all five. These are full range rubber surround. One is magnetically sheilded.

Rated 30 Watts 4 ohms

Add to Cart  $8

Zenith TO 1000 Antenna

Very good condition (antenna) Handle needs a little TLC. Compete assembly in great condition ready to install. Can be used for anything requiring a heavy duty very long antenna. Like HAM radio.

Add to Cart  $15

NOS Tape Deck motors

These are New Old Stock used for high qulity tape decks in the seventies. Super quiet and stable. We don't know much ,ore than that. We used to use them in HIFI cassette and 8 track tape decks as replacements. These were made in 1974 in Japan 10 available.

Add to Cart $12 each

Speaker Grille

Nice ornate with a great grille cloth insert.

Add to Cart  $10

Tandberg Slide Pots

These come from a 100% functional machine. Model 9000, but works in others. These are large type, and you get all four for $2 each! Can certainly be used for many other projects. Includes mounting hardware.

Add to Cart $8

Philco 33-5596-1

OEM NOS 12.5K ohm potentiometer. Used for width control on a Philcom TV. Can be used for any electronic circuit. There are two available.

$3 each

Philco 32-4673-1

OEM NOS Ratio detector transformer.

$3

NOS Knob

Never used NIB. Not sure what it goes to but its a nice gold tone.

$3

RCA 76436

OEM NOS IF transformer.

$5

Pioneer Cassette Deck Heads and Plate

We know there are good heads, but we don't remeber what deck. May have been a CT-F7272. Would work in many decks even if they were not Pioneer. They appear to have been used lightly, and are a good quality HIFI type. These were carefully removed with maximum wire length for connecting. What you see is what you get.

Add to Cart $10

Zenith Tube Shield

Very early tube shields 1920-1930 eara. Excellent condition, we have two pairs to offer. Price reflects one pair as shown.

Add to Cart $15

Zenith Top Handle

Hardware and end caps included as shown. This is in great condition needs a little TLC. Comes out of a portable long distance radio.

Add to Cart $12

Zenith Portable Long Distance Hardware

You get everything shown. This is a Zenith hardware collection, but your welcome to use it on anything.

Add to Cart $12

Grundig Microphone

Has a 3 pin DIN connector. Working condition. Not sure what ti went to, but probably a tape deck. Can be used for anything requiring a mic.

Add to Cart $7

Pioneer Push Button Power Switch

Don't remeber what it came out exactly. It came out of a vintage tape deck, but fits many other vintage Pioneer equipment. Been in storage for ten years.

Add to Cart $10

SOLD

Add to Cart

 

Philco Tube Shield?

Shields two tubes at once. Not sure what model radio it came out of. It is hard to find and many sets are mmissing this.

Add to Cart $12

Tandberg 9000 Head Covers

Excellent condition! You get both parts. Came off a working Reel to Reel deck.

Add to Cart $25

Aiwa Solenoid

Pulled with care working like new. Can be used for anything you see fit, or an OEM replacement.

Add to Cart $5

Pioneer Solenoid RXP-030-A

Pioneer used tested and working. Used in many vintage decks.

Add to Cart $5

Akai Solenoid P-50U

Could be used for anything. these are low voltage, small, and very powerful.

Add to Cart$5

Tandberg 9000 FF/RR Motor

100% functional. Super high quality motor. Mounting hardware and full size wires included. Running capacitor also included. This everything you need carefully removed with maximum wires for installation. Came out of of a 100% functional machine.

Add to Cart  $25

Pioneer CT-F8282 P/N RAW-050-0

We have two of these to offer. They are working and in great condition. You get one at this price. Could be used for anything. This is a very high quality meter.

Add to Cart $10

 

Arvin Microphone

Came from an old portable reel to reel, but used in mnay of thier tape recorders. This has the double jack connector. One used for the audio, the other for pause

Add to Cart $5

Pioneer Lamp Hoods

These are used in vintage Pioneer tape decks and recievers. They are lamp hoods and made of rubber. These are not dried out. You get all three as shown.

SOLD

Pioneer Tape Deck Meter

Came out of a Pioneer cassette deck. Don't know what one!These are great meters and can be used for anything.  We have two to offer.

Add to Cart $10

CPU Fan and Heatsink

Made for a PC, again can be used for anything!

Add to Cart $5

Awai 6700 VU Meter

Another great meter. I just hate to toss these, but I need to move some out. We have two of these, but you get one at the listed price.

Add to Cart $15

Component Feet

Nice set of four for vintage componet like a tape deck or reciever.

Add to Cart $10

RC Racing Motor 6 turn

Old school power. I used this years ago when racing RC cars. It is extreme when it comes to power. Aluminum housing, seald bearings, and replacable brushes. All top end at the time. Can be used for anything needing a powerful small light weight motor.

Add to Cart $10

Sony OEM Audio Cords

1/8 inch mono plug to standard RCA plug. You get two for stereo operation. About 3 feet long was used in a portable cassette player. 

Add to Cart $5

Aiwa 6700 Solenoid

Working and removed with care.

Add to Cart $5

Hobby Motor, Tape Deck

This is from a tape deck from the sixties. It is very high quality. Cast body and rubber mounting posts. Also has a govenor built on the rear. This could be wired without the govenor as well. tested with 6 - 12 volts DC.

Add to Cart $5

Chrome Hardware Group/Lot

Very nice bright chrome parts for making a case. Latches and screws, handle and screws, and more.

Add to Cart $8

 

 

 

 

Add to Cart